該產品用于加工托輥鋼管及網架桿架切斷與倒角。刀架的進給速度可調,電器部分采用可編程序控制器“PLC”,送料、定位、卡緊、切斷(倒角)可依次完成。
規格 QGJ-16*220 QGJ-22*260
機床主軸高 800mm 800mm
液壓系統工作壓力 1.5—4mpa 1.5—4mpa
主軸轉速 150、220r/min 100、160、250r/min
進刀速度 可調速
主軸電機 15kw 960r/min 22kw 960r/min
液壓系統電機 4kw 4kw
送料機構電機 1.5kw 1.5kw
切削鋼管直徑 φ89—φ160mm φ89—φ219mm
切削鋼管長度 180—2200mm 180—2600mm
送料長度 12000mm 12000mm
設備外形尺寸 19150*1550*1130mm 20310*2420*1250mm
設備重量 6500kg 8400kg
加工精度
切削長度重復精度 ≤0.5mm ≤0.5mm
切斷鋼管兩端面平行度 ≤0.4mm ≤0.4mm
切斷倒角表面粗糙度Ra 6.3—3.2μm 6.3—3.2μm
Steel tube auto-chamfer cut out machine tool
This product is used for processing roller steel tube and rack. The speed and depth are adjustable, For electrical control, adopt imported “PLC”, which works accurately and with stable performance.
feeding, orientation, card tight, cut off (chamfering) can be completed in turn.
Specifications QGJ-16*220 QGJ-22*260
Center height of main shaft of machine tool 800mm 800mm
Hydraulic system work pressure 1.5—4mpa 1.5—4mpa
Speed of the main shaft 150、220r/min 100、160、250r/min
Feeding speed Hydraulic stepless speed regulation Hydraulic stepless speed regulation
Motor of the main shaft 15kw 960r/min 22kw 960r/min
Motor of hydraulic system 4kw 4kw
Motor of feed carriage 1.5kw 1.5kw
Diameter of cutoff steel pipe φ89—φ160mm φ89—φ219mm
Length of cutoff steel pipe 180—2200mm 180—2600mm
Feeding length 12000mm 12000mm
Physical dimension 19150*1550*1130mm 20310*2420*1250mm
Weight of the equipment 6500kg 8400kg
Processing precision
Repeat precision of cutting length ≤0.5mm ≤0.5mm
Parallelism of both cut end faces ≤0.4mm ≤0.4mm